|
 |
|
|
|
|
 Rifa eX 66 is the second largest of the Lowel Rifa eXchange family. Its diffusion screen measures 25" square, making its output very soft. Use it with its supplied TH-X1000 lamphead and max. 750w lamp for highest output, or switch to a 500w lamp for decreased output with the same level of softness. Its 60 second set-up gets you lighting quickly, while its collapsed size allows it to fit into many of our smaller kits & cases.
Now enhanced with the abilities of the Rifa eXchange System, this light can quickly swap to accessory lampheads for lower wattage AC / DC tungsten-halogen, or to use screw-threaded daylight fluorescents.
 |
Dedicated softlight fixture with removable 750w lamphead centered in collapsible silver aluminized high temperature Nomex® housing.
|
|
105 - 750w available Tungsten-halogen range when combined with accessory X300 lamphead. Other lamphead options for screw-in daylight fluorescent or incadescent also available.
|
|
Umbrella-like design for quick 60 second setup & strike.
|
|
State of the art woven glass fabric front diffuser offers exceptional heat resistance.
Front diffuser must always be used.
|
|
Light controlled with fold-up accessory fabric Egg Crates.
|
|
A variety of kit options are available.
|
|
Other accessories include fabric Egg Crates, Balance Bar for more versatile positioning, plus many standard Lowel mounting accessories.
|
|
|
|
Rifa™ eXchange™ 66
|
|
Rifa eX™ 66
Code: LC-66EX
Size: 25 x 25" (63.5 x 63.5 cm), 29.5" (75 cm) collapsed
Weight with 4' captive cable: 3.5 lbs (1.6 kg)
With removable TH-X1000 lamphead, 4' captive cable, 16' switched #18/3 extending power cord (T1-80), diffuser panel (LC-66D) and carrying sleeve. Less lamp.
US List Price: $730.00
|
|
Rifa eX 66 w/ EHG Lamp
Code: LC-66EX1
Same as above with 1 750w 120v Lamp (EHG)
US List Price: $765.00
|
|
|
|
Accessory Lampheads for Rifa eX™66
|
|
Code: TH-X300
Weight: 2.1 lbs (1 kg)
With protective end-cap, less lamp.
US List Price: $70.00
|
Code: FLO-X1
Weight: 2.1 lbs (1 kg)
With protective end-cap, less lamp.
US List Price: $70.00
|
 |
Code: FLO-X3
Weight: 2.1 lbs (1 kg)
With protective end-cap, less lamp.
US List Price: $150.00 |
Some Rifa eX Kits listed below have room to add Accessory Paks with these lampheads
Rifa eXchange Accessory Paks with lamps
|
Uses these Stands & Mounts
|
|
|
 |
Balance Bar
Code: LC-30
Size: 12.5" (31.8 cm)
Weight: 6.5 oz (184 g)
The Rifa Balance Bar is an extension arm accessory that mounts between the Rifa eX and its stand fitting. When installed, it effectively changes the Rifašs center of gravity to facilitate angling and tilting of the light when necessary, such as on a boom arm, without the need to overtighten the stand fitting knob.
US List Price: $37.00 |
|
 |
KS Jr. Stand
Code: DT-33
Weight: 3.5 lbs (1.6 kg)
Size: 2.3' (65 cm) folded
Maximum height: 7'7" (2.3 m)
Wide based, sturdy, lightweight stand with 5/8" (1.59 cm)
stud and solid bar legs. For
Rifa 44, 55, 66.
US List Price: $122.50
|
|
 |
KS Stand
Code: KS
Weight: 4 lbs (1.8 kg)
Size: 3' (91 cm) folded.
Maximum height: 9' (2.74 m)
Wide based, sturdier, lightweight stand with 5/8" (1.59 cm) stud. For all 4 Rifas.
US List Price: $142.50
|
|
 |
KSA Stand
Code: KSA
Weight: 4 lbs (1.8 kg)
Size: 3' (91 cm) folded.
Maximum height: 9' (2.74 m)
Black-anodized, air-cushioned stand. Wide based, sturdier, lightweight stand with 5/8" (1.59 cm) stud. For all 4 Rifas.
US List Price: $157.50
|
|
 |
Tota-clamp
Code: T1-30
Weight: 4 oz (113 g)
Clamps onto pipes, shelves, etc. up to 1 7/8" (4.78 cm) thick. 5/8" (1.59 cm) stud locks in two positions and accepts a light. Also accepts two Flexi-shafts with flags or flectors.
US List Price: $28.00 |
|
 |
Safety Cable (3)
Code: CM-50
Size: 34" (86.4 cm)
Weight: 2 oz (57 g)
Braided stainless-steel cable adds security to lights and accessories that are attached to overhead pipes, beams, dropped-ceiling grids, etc. (Set of 3)
US List Price: $22.50 |
|
|
|
[top]
home | about us | news
| contact us | dealers
©2007 Lowel Light Inc.
|
