 |
Uni-stand
Code: UN-33
Weight: 2.38 lbs (1.08 kg)
Size: 21.5" (54.6 cm) folded.
Extends to 7'11"
All aluminum stand, wide base,
legs can lie flat to floor, large locking knobs. Folds compactly to fit in smaller kits.
US List Price: $94.00
|
 |
 |
Stand-link
Code: ViP-39
Weight: 2 oz (56 g)
Rugged metal Stand-link mounts all ViP lights on 5/8" and smaller studs
on stands, clamps, handles and Scissor-mounts. Supplied with all ViP lights.
US List Price: $11.50
|
|
 |
Vipod with Stud-link
Code: ViP-35S
Weight: 5 oz (142 g)
Supports ViP lights on the floor
or other flat surfaces. It can be
screwed, Gaffer-taped or
clamped to vertical surfaces. Combines with other ViP mounts for special uses.
Stud-link is removable.
US List Price: $20.00
|
 |
Vipod only
Code: ViP-35
Weight: 4 oz (112 g)
US List Price: $15.00
|
|
|
 |
L-link
Code: ViP-36
Weight: 2 oz (57 g)
Supplied with V-light. It can also be
used with the Pro and i-lights and
the Cam-link or Vipod to extend or
re-position a light.
US List Price: $13.50 |
|
 |
Low-link
Code: ViP-37
Weight: 1 oz (28 g)
It enables the Pro and i-lights to be camera-mounted with a Camlink or a 1/4-20 screw.
US List Price: $9.00 |
|
 |
Stud-link
Code: ViP-38
Weight: 1 oz (28 g)
5/8" (1.59 cm) stud with 1/4-20 screw, supplied with the Vipod. Can be used with Cam-link or directly on some video cameras.
US List Price: $9.00 |
|
 |
Cam-link
Code: ViP-41
Weight: 1 oz (28 g)
Locks onto video cameras that have a female shoe. It accepts a Low-link, L-link, or Stud-link.
US List Price: $10.50
|
|
Cam-link & Stud-link
Code: ViP-41S
Weight: 2 oz (57 g)
US List Price: $16.50
|
|
Cam-link & Low-link
Code: ViP-41L
Weight: 2 oz (57 g)
For Pro- or i-light camera shoe mounting.
US List Price: $15.00
|
|
|
|
Handle & Stud
Code: ViP-431
Weight: 3 oz (85 g)
For hand holding ViP lights.
Updated Handle with 1/4-20
screw-threaded post, and 5/8"
Stud with 1/4-20 screw-thread
hole in bottom. Without Stud,
Handle accepts screw-thread at
bottom of UMB on ViPLights.
With Stud, can accept ViP or
other small lights with 5/8"
stand-fitting.
US List Price: $30.00
|
|
|
 |
Tota-clamp
Code: T1-30
Weight: 4 oz (113 g)
Clamps onto pipes, shelves, etc. up to 1 7/8" (4.78 cm) thick. 5/8" (1.59 cm) stud locks in two positions and accepts a light. Also accepts two Flexi-shafts with flags or flectors.
US List Price: $29.00 |
|
 |
Tota-mount
Code: T1-32
Weight: 10 oz (284 g)
Supports ViP lights on
top of doors (open or semi-closed), on windows and some walls,
when attached carefully with Gaffer-tape.
US List Price: $42.50 |
|
 |
Gaffer-tape
The highest quality, cloth-backed adhesive tape attaches Lowel mounts to windows and walls.
12 yd roll
Code: GT-12
Weight: 8 oz (227 g)
US List Price: $15.00
|
|
30 yd roll
Code: GT-30
Weight: 1.25 lbs (567 g)
US List Price: $29.50
|
|
|
 |
Scissor-mount (2)
Code: CM-20
Weight: 9 oz (250 g)
Attaches small lights and accessories to grid of dropped-ceilings in offices and other areas. Use Gridlock (CM-21) with Pro-light.
(Set of 2).
US List Price: $25.00 |
|
 |
Gridlock
Code: CM-21
Weight: 9 oz (250 g)
Attaches Pro-light right side up to the T-bar of dropped ceiling grids. Can also be used with i and V lights. (1 only).
US List Price: $19.50 |
|
 |
Lobo
Code: F1-30
Weight: 10 oz (284 g)
Attaches Lobo Arm to top or
any part of a stand to make a miniature boom for ViP Lights. Also mounts large umbrellas, flags, etc.
US List Price: $27.50 |
|
 |
Lobo Arm
Code: F1-40
Weight: 3 oz (85 g)
22" (55.9 cm) shaft with 5/8" (1.59 cm) stud. Extends, articulates and booms small lights, reflectors, etc.
US List Price: $17.50 |
|
 |
Safety Cable (3)
Code: CM-50
Size: 34" (86.4 cm)
Weight: 2 oz (57 g)
Braided stainless-steel cable adds security to lights and accessories that are attached to overhead pipes, beams, dropped-ceiling grids, etc. (Set of 3)
US List Price: $23.50 |
|
