Adapts to Create Many Mounting Options
The Interlink System interconnects various Lowel mounting components, to add multiple mounting positions. The 2 double male studs are removable, and have 1/4-20 threaded holes in them for versatility.

Goalpost Rig for Cloth Backdrops
With two stands and up to two Full Poles, a goalpost rig can be quickly assembled to support a muslin background. Here, the stud from the Full Pole is fitted in place of a Double Male Stud.

Goalpost Rig for Rolls of Seamless
The same rig can support rolls of seamless with cardboard cores, tho the Pole knobs may get in the way of the core. Remove the knobs and replace with 1/4-20 bolts for an easier fit.

Supporting Rolls of Seamless without Pole
Interlink can create a quick support for paper background rolls that have a core, when using a Pole a crossbar isn't available or necessary. The cross Double Male Stud is offset to one side, to support the roll better.

Supporting Both Seamless & Light
While supporting a roll of seamless, Interlink also provides a mounting position for a back light, or other grip equipment. This is the perfect place for a hair or edge light to be attached, when shooting green screen.

Used with Big-foot and Ceiling Link
On the left, Interlink & Big-foot provide an option for mounting a light at a right angle. On the right, Interlink mounts between Pole and Ceiling Link to add a mounting stud for a light.

Missing Link
This versatile mounting device features a double articulating female fitting which provides increased flexibility when positioning small lights, flags, reflectors, poles, etc. Shown here with Spring Clamp

Spring Clamp
A spring clamp with a standard 5/8" stud mounted on it. A simple and fast way to mount a small light on a bookshelf, ledge or rail up to two inches thick.

Tota-daptor
A piece best known for its ability to stack Tota-lights into arrays, providing greater output & coverage when lighting large areas evenly. It also converts smaller stand studs to 5/8" and accepts 2 Flexi-shafts.

Stud-link
Typically the Stud-link is mounted to larger video cameras in a reinforced ? - 20 threaded hole intended for this purpose. This can leave the accessory shoe free to mount other things.

Handle & Stud-link
The Handle & Stud-link combination allows quick change from light stands to hand held use.

Screw-in Stud
A straight-forward method of mounting lights or other grip equipment on wooden sets. A 5/8" stud, with a large woodscrew on the bottom and a hole for easy tightening using a screwdriver